Svoemesto Kayfun [Lite] Moonlight Edition - 22mm

The Kayfun Lite was first introduced in 2013 as the entry level Kayfun and it quickly became the benchmark RTA to which all MTL atomisers have been compared for flavour. Now in 2019 it's back and greatly improved to incorporate a new style build deck from the Prime that's not only easier to build than the original Lite, but greatly reduces the overall height of the tank. The new Kayfun [Lite] is a diminutive 33mm in height, that's shorter than some drippers on the market! The build deck can be accessed with liquid in the tank and filling is much easier now that it is done through the bottom of the tank instead of a small hole under the base. Air flow is adjustable with a grub screw hidden inside the 510 post.

Features

• Media blasted Moonlight (light grey version)
• Super-short design
• 316L SS construction
• Easy to build deck
• Bottom filling
• PEEK insulators
• PEI (Ultem viewing window)
• 2ml capacity
• Step-less adjustable air flow from 0 - 1.8mm
• Small chamber size for the best possible flavour
• Made in Germany
• Serial number for authentication

Dimensions
Diameter: 22mm
Length: 33mm (not including 510 thread or tip)
Capacity: 2ml

Kit Contents

• Kayfun [Lite] Moonlight Edition - 22mm with Ultem window
• Full spares pack
• User guide

Please note the coil screws do NOT come pre-installed on the deck. There are two sets included in the spares pack in the kit.
 

Support, discussion and tips can all be found in our dedicated SvoeMesto Facebook group.

*IMPORTANT NOTES:
As with all rebuildables, this is an advanced user device and requires the willingness to experiment to get the best out of it for your own individual and unique vaping style. Please be sure you have done your research prior to purchase in order to understand what's required to build and use this device as it is not supplied with coil and wick installed. We recommend you test any coils you produce with a multi-meter before using to avoid risk of damaging your battery. Return requests for any reason other than a genuine manufacturing fault will not be accepted.

Message from manufacturer:
Disclaimer: Finished and coated surfaces are scratch-sensitive and therefore not included in the warranty. Please, handle with care.
The blasted versions may have different levels of brightness depending on the light irradiation.
As a result, the brightness of the product may differ from the product image shown here.