
XTAR VP2 Lithium Ion Battery Charger
Includes UK Mains lead and a car adapter
Featuring a very handy real-time charging display, the VP2 is a lithium-ion and LiFePO4 charger suitable for all the batteries we currently stock including the 26650. The VP2 has two independent charging bays for 14500, 14650, 17670, 18350, 18500, 18650, 18700, 10440, LIR123A, RCR123, 16340, 20700, 21700, 22650, 25500 and 26650 type batteries. A choice of charging currents are available to suitable individual battery requirements, the modes are easily selected using the push button switch on the charging unit.
The charger features a power output USB port on the rear, so you can use the VP2 as a power bank. The output provided is rated at 1000 mA and is powered by inserting a suitable battery into one charging bay of the VP2. Supplied with a UK mains adaptor and 12 volt car charger adaptor.
VP2 Features
- Two independent charging bays
- Undervoltage lockout and algorithm (CC.CV) charging method
- Real-time battery and IC temperature monitoring
- Optional and adjustable charge current (250mA, 500mA, 1A)
- Charging voltage selection (3.2 V, 3.6 V or 3.8 V)
- Soft start function avoids damage from a large current surge
- Reverse-polarity protection circuit board
- Short circuit protection
- Real time LCD display with charging status information
- Supplied with UK Mains lead and vehicle charging adapter
- Batteries NOT included
VP2 Specifications
- Operation Temperature: Room temperature 0 to 40 °C
- UK Mains Adaptor Input: 100-240 V ac, 50/60 Hz
- Input Voltage: 12 V dc 1000 mA
- 0.25 A CC: 250 mA ±30 mA
- 0.5 A CC: 500 mA ±50 mA
- 1.0 A CC: 1000 mA ±80 mA
- Terminal Current for 0.25 A and 0.5 A Mode: ≦50 mA
- Terminal Current for 1 A Mode: ≦80 mA
- When voltage selector is set at 3.2 V the termination voltage is 3.6 V ±0.05 V
- When voltage selector is set at 3.6 V the termination voltage is 4.2 V ±0.05 V
- When voltage selector is set at 3.8 V the termination voltage is 4.35 V ±0.05 V
- Voltage Display Precision: ±0.03 V
- Dimensions: 135 mm (L) x 68 mm (W) x 35 mm (H)
- Weight: 134 grams
USB port output Specifications
- Operating temperature: 0-40 ℃
- USB no-load voltage: 5.0 ±0.3 V
- Maximum output current: 1000 mA
- Battery output cut-off voltage: 3.0 ±0.2 V
Box Contents
- XTAR VP2 dual bay charger
- 1 UK mains adaptor
- 12 volt car adaptor
- Manual
- Warranty card
Note: Packaging may vary from that shown in photos.